Loading
At YACHTNEEDS marketplace, we’ve sourced everything needed for any superyacht’s inboard engine steering system. Shop here for Vetus double steering systems, Vetus single steering systems, two hose kits, hydraulic cylinders for inboard engines, rear dashboard pumps, Ultraflex frontal mounting pumps, and more.
Manufacturer
Boat length m
Manufacturer
Boat length m
In stock
Ultraflex Mechanical Engine steering cable M66 - 21 ftPart NUM 11111-SIB-38183W
In stock
Volvo Penta D3 shift actuator EVC kit 21858701Part NUM 11111-H10061-21858701
In stock
Volvo Penta steering wheel adjusting system - 3841280Part NUM 11111-SIB-3841280
In stock
Designed for small and medium-sized boats with hydraulic steering. They are equipped with a 9-axis solid-state AHRS technology to ensure precise and accurate compass data, reduced rudder movement, and lower energy consumption. Easy to install thanks to multiple mounting options, they guarantee quick operation through a compatible chartplotter or GHC 20 control unit.Part NUM 29.009.30
In stock
Built entirely of stainless materials, made using the most modern techniques in the industry, CE approved. Important: A) Vetus steering systems, except for the 45.030.10 model, can be installed with R7 5/16 flexible hose (45.028.14) or with 8x10 mm copper tubing (45.028.10). Copper tubing does not require additional fittings, while flexible hose requires 45.028.18/19 fittings in the quantities indicated next to the steering systems. B) The 45.030.10 steering system uses 6x8 nylon or copper tubing (45.028.11). The sizing of the steering systems is purely indicative. The choice should take into account not only the size of the hull, but also the power of the engines, the size of the rudders, and the weight and type of the hull. Therefore, please provide us with all the aforementioned data in order for us to advise you on the most appropriate steering system. - Vetus MT 30 single hydraulic steering - 45.030.10 - VetusPart NUM 45.030.10
In stock
Built entirely of stainless materials, made using the most modern techniques in the industry, CE approved. Important: A) Vetus steering systems, except for the 45.030.10 model, can be installed with R7 5/16 flexible hose (45.028.14) or with 8x10 mm copper tubing (45.028.10). Copper tubing does not require additional fittings, while flexible hose requires 45.028.18/19 fittings in the quantities indicated next to the steering systems. B) The 45.030.10 steering system uses 6x8 nylon or copper tubing (45.028.11). The sizing of the steering systems is purely indicative. The choice should take into account not only the size of the hull, but also the power of the engines, the size of the rudders, and the weight and type of the hull. Therefore, please provide us with all the aforementioned data in order for us to advise you on the most appropriate steering system. - Hydraulic steering MT 52 single Vetus - 45.045.10 - VetusPart NUM 45.030.10
In stock
Built entirely of stainless materials, made using the most modern techniques in the industry, CE approved. Important: A) Vetus steering systems, except for the 45.030.10 model, can be installed with R7 5/16 flexible hose (45.028.14) or with 8x10 mm copper tubing (45.028.10). Copper tubing does not require additional fittings, while flexible hose requires 45.028.18/19 fittings in the quantities indicated next to the steering systems. B) The 45.030.10 steering system uses 6x8 nylon or copper tubing (45.028.11). The sizing of the steering systems is purely indicative. The choice should take into account not only the size of the hull, but also the power of the engines, the size of the rudders, and the weight and type of the hull. Therefore, please provide us with all the aforementioned data in order for us to advise you on the most appropriate steering system. - Vetus MT125 double hydraulic steering - 45.110.20 - VetusPart NUM 45.030.10
In stock
Single rotary steering gear T81 - Non-reversible steering T83 - 45.083.00 - OemPart NUM 45.081.00
In stock
Built entirely of stainless materials, made using the most modern techniques in the industry, CE approved. Important: A) Vetus steering systems, except for the 45.030.10 model, can be installed with R7 5/16 flexible hose (45.028.14) or with 8x10 mm copper tubing (45.028.10). Copper tubing does not require additional fittings, while flexible hose requires 45.028.18/19 fittings in the quantities indicated next to the steering systems. B) The 45.030.10 steering system uses 6x8 nylon or copper tubing (45.028.11). The sizing of the steering systems is purely indicative. The choice should take into account not only the size of the hull, but also the power of the engines, the size of the rudders, and the weight and type of the hull. Therefore, please provide us with all the aforementioned data in order for us to advise you on the most appropriate steering system. - Vetus MT175 double hydraulic steering system - 45.140.20 - VetusPart NUM 45.030.10
In stock
Alphatron AlphaPilot Mk2/Mk3 tiller mechanism and single potmeterPart NUM 11111-AR-3104.0500
In stock
Sigmadrive SD100 45 mm shaft drive link - SD100.45Part NUM 11111-CDP1-SD100.45
In stock
Hydraulic Seal TS 45 mm oil lubricated shaft seal kit - 33280692Part NUM 11111-C-33280692-1
In stock
Jefa self aligning top bearing 100 mm - S100Z-20Part NUM 11111-H-S100Z-20
In stock
Jefa rudder bearing 84 mm - M13-459-84 for Dehler 46Part NUM 11111-H-M13-459-84
In stock
Jefa Hanse 575 fibreglass rudder blade 126 mm - TRU0144Part NUM 11111-H10058-H11ARUD55
In stock
Lewmar Link 601-700 mm CRS AHFT12 - 89500211Part NUM 11111-H-89500211
In stock
Mercury Mercruiser hydraulic steering cylinder Bravo / Alpha series - 8M0109183Part NUM 11111-BYB-M-8M0109183
In stock
Rexmar bronze hydraulic shaft seal propeller shaft kit 60 mm - 33280693Part NUM 11111-C-33280693
In stock
Seastar Hydraulic kit gland EM-3 - HP6027Part NUM 11111-A-HP6027
In stock
Teignbridge duplex propeller shaft 50 mm | 2405 mm with bold - anode - APS1433Part NUM 11111-C-APS1433