Loading
Inverters on superyachts convert DC battery power into AC power which is then passed on to connected equipment. A combined inverter charger also uses the connected AC power source to charge the connected batteries.
Shop in this category for a wide range of battery chargers and inverters. We have Victron Phoenix inverters, Quattro Combo battery chargers & inverters, Multiplus combined systems, and much more.
Manufacturer
Input voltage (V)
Ampheres (A)
Cont. Output Power (Kva)
Manufacturer
Input voltage (V)
Ampheres (A)
Cont. Output Power (Kva)
In stock
3-stage IUoUo automatic chargers, with independent outputs to simultaneously charge 3 banks - full power batteries. Technical data: - Aluminum housing.Part NUM 14.274.02
In stock
Three-stage IUOU charger with a microprocessor that perfectly adapts to the type of charge required by the battery, a very important function for sealed batteries. Two isolated outputs. The second, limited to 4 A, is dedicated to starting batteries. Automatic battery temperature compensation system. Important for sealed batteries as it extends their lifespan. Technical data: Power supply 180/264 VAC - 180/400 VDC - 45/65 Hz.Part NUM 14.267.01
Victron Energy
In stock
Completely waterproof, complete with extra long cables (1.8 m).Part NUM 14.277.31
In stock
Completely waterproof, complete with extra long cables (1.8 m).Part NUM 14.277.31
In stock
Developed with Sinumax technology for professional use, they guarantee the necessary power with reduced size. The particular feature of Sinumax technology is the high peak power for startups, as required by refrigerators, electric motors, lamps, etc. Technical features include an aluminum casing, forced ventilation with temperature sensors, protection against short circuits, alarm for excessively high or low battery voltage, reverse polarity, output voltage return, etc. If you want the automatic switching function to another AC power source, we recommend the Multiplus inverter/charger, which has this integrated function and you can deactivate only the charger. Phoenix: a) Connection to PC via VE-Bus to USB port. b) Remote on/off. Phoenix Smart: a) Configurable integrated Bluetooth with tablet or smartphone. b) VE-DIRECT serial port for connection to PC via VE-Direct to USB cable. c) ECO mode that puts the inverter in Stand-by if the load drops below a preset value. d) Remote on/off.Part NUM 14.270.15
In stock
This device disconnects the battery from non-essential loads before it is completely discharged and prevents the engine from starting.Part NUM 14.275.11
Victron Energy
In stock
They prevent galvanic corrosion caused by different metals present in the boat. They prevent galvanic currents from entering through the power cables from the dock.Part NUM 14.275.40
Victron Energy
In stock
This device disconnects the battery from non-essential loads before it is completely discharged and prevents the engine from starting.Part NUM 14.275.11
In stock
Synchronized parallel operation.Part NUM 14.267.03
In stock
Synchronized parallel operation.Part NUM 14.267.03
In stock
Synchronized parallel operation.Part NUM 14.267.03
In stock
- Bluetooth enabled: any Bluetooth device can be used to monitor, change settings, and update the charger. - Version 1+1: second 3A output designed for jump-start battery charging. - Version 3: each output provides maximum nominal charge. - Automatic voltage compensation, caused by voltage drops in DC cables. - 5-stage charging algorithm: constant current, absorption, reconditioning, maintenance, and storage. - Calibrated charging depending on whether the boat is connected to shore AC power or not. - BatterySafe: prevents battery gasification damage. - Storage mode: if the battery does not discharge for 24 consecutive hours, this mode minimizes gasification and plate corrosion. - Universal power supply 90/265 VAC 90/400 VDC-45/60 Hz. - Protection against overvoltage, short circuit, and over temperature. - Also charges Li-ion batteries. - Programmable charging algorithm (via Bluetooth). - Remote on/off. - VE Direct interface.Part NUM 14.207.30
In stock
3-stage IUoUo automatic chargers, with independent outputs to simultaneously charge 3 banks - full power batteries. Technical data: - Aluminum housing.Part NUM 14.274.02
In stock
Automatically switch the power source between the dock and the inverter.Part NUM 14.270.42
Victron Energy
In stock
This is a powerful relay that automatically connects the batteries in parallel when one of them reaches the predetermined voltage and separates them when the voltage drops below the FLOATING level. The Cryrix-I is a great alternative to diode separators as there is no voltage drop. The classic installation involves the alternator directly connected to the starting battery. The service battery and bow thruster are connected to the starting battery with the Cyrix-I. When the Cyrix-I senses that the starting battery is fully charged, it will activate and allow parallel charging of the other batteries. The Cryix-I detects the voltage of both batteries and will activate if, for example, the service battery is under the charger.Part NUM 14.263.01
Victron Energy
In stock
Synchronized parallel operation.Part NUM 14.267.03
Victron Energy
In stock
Using the Victron-connect App, these chargers connect to your smartphone, tablet or computer via Bluetooth, allowing for initial configuration and displaying all charging data. Power supply 180-265 VAC. 4-stage charging algorithm. BULK - ABSORPTION - FLOAT - STORAGE. Less battery aging and maintenance when not in use, with the STORAGE MODE system. Protection against overloads, short circuits, overheating. Efficiency of 92% and above, with very low heat dissipation.Part NUM 14.273.13
Victron Energy
In stock
Using the Victron-Connect APP, these battery chargers connect to your smartphone, tablet, or computer via Bluetooth, allowing for initial configuration and displaying all charging data. Power supply 180-265 V AC, charge status LED indicators. 7-stage charging algorithm, ideal for sealed batteries. Suitable for all battery types, including Li-ion. Automatic compensation for high-low temperatures. LOW system for charging small batteries. Program for recovering a fully discharged battery. Automatic power supply function. Accessories included: connection clamps, M8 eyelets.Part NUM 14.273.06
Victron Energy
In stock
Using the Victron-connect App, these battery chargers connect to your smartphone, tablet or computer via Bluetooth, allowing initial configuration and displaying all charging data. Input voltage: 180/265 VAC 45/65 Hz 250/350VDC 6-stage charging: TEST - BULK - ABSORPTION - RECONDITION - FLOAT - STORAGE, with charge status LED indicators. Microprocessor control adapts the charging type to battery needs. Protections against short circuits, reverse polarity, and overtemperature. The "storage" function automatically reduces float function to 13.2V to minimize gassing and corrosion of positive plates. IP22. Suitable for all battery types, including Li-ion.Part NUM 14.272.10
In stock
3-stage IUoUo automatic chargers, with independent outputs to simultaneously charge 3 banks - full power batteries. Technical data: - Aluminum housing.Part NUM 14.274.02